Support

Assembly & Safety

Everything you need to build your WELLMOTION STAND and keep it safe to train on.

The assembled EINNO WELLMOTION STAND
Open on YouTube ↗
Tool needed
S4 hex keyIncluded in the box
Assembly time
About 30 minutesStart to finish
Clear space
20 in / 50 cmOn all sides
Max user weight
330 lb / 150 kgDo not exceed

Before you train

WELLMOTION STAND Safety Checks

Before each home workout, take a minute to check the frame, resistance bands and surrounding floor space. These simple steps help keep your WELLMOTION STAND stable and ready to use.

  1. Secure the frame

    Confirm that every screw, nut and locking pin is fully seated before you begin exercising.

  2. Inspect the resistance bands

    Check each band and protective sleeve for cracks, fraying, stretching or other signs of wear. Replace damaged bands immediately.

  3. Clear the training area

    Place the frame on a firm, level floor and keep at least 20 in (50 cm) of clear space on every side. Use a protective mat if needed.

Safe-use requirements

  • Maximum user weight: 330 lb (150 kg). Do not exceed this limit.
  • Designed for adult use. Keep children and pets away from the frame during training.
  • Wear fitted athletic clothing. Loose clothing can become caught in the frame or resistance bands.
  • Stop if equipment appears damaged. Do not use the frame if a part looks damaged or you hear an unusual noise. Resume only after the problem has been corrected.

Fold and store the frame safely

  • Keep hands and feet clear. Avoid the frame’s pinch points while folding or unfolding it.
  • Move both sides evenly. Forcing one side on its own can jam the mechanism or damage the frame.
  • Choose a stable storage position. Once folded, place the frame where it cannot slide or be knocked over.

Important Safety Notice

EINNO WellMotion Stand is designed to support individuals seeking rehabilitation-oriented, low-intensity training, up to a maximum load of 330 lbs (150 kg).

It is not a medical device and does not replace professional rehabilitation care — consult a healthcare professional if you have a medical condition, injury, or balance concern before use.

Product care

Care & Storage

Simple care and proper storage can help keep your WELLMOTION STAND clean, protected and ready for your next workout.

  1. Wipe the frame with a dry or slightly damp soft cloth. Never use harsh or corrosive cleaners.

  2. Hand-wash the waist belt and cuffs in mild detergent and air-dry them out of direct sunlight.

  3. Store the frame in a cool, dry place away from direct sunlight and humidity.

  4. Remove the resistance bands and store them separately if the frame will not be used for a while.

  5. Replace the bands periodically depending on how often you train, and immediately at any sign of ageing.

Need a hand?

Email us and a real person will get back to you. You can also download the full WELLMOTION STAND manual for assembly, safety, care and product information.

Email support@einno.com Download the Full Manual (PDF)